Encoder Incrementale
TK60
Ø63 mm
Heavy-duty incremental encoder Ø63.5 mm for heavy industrial applications. Rugged with resolution up to 20,000 PPR.
The TK60 is a high-speed optical incremental encoder with maximum RPM of 12,000 (short cycle). Available in two variants: SG version (Ø63.5 mm, servo-clip flange) and H version (Ø60 mm, flange for direct mounting with milling clip). Treated aluminum housing, 6, 8 or 10 mm stainless steel shaft. Output frequency up to 300 kHz. Ideal for high speed motors and spindles.
Ø63 mmIP666.000 RPM
Technical Specifications
| Parameter | Value |
|---|---|
| Resolution | Up to 20.000 PPR |
| Power Supply | 5V; 11÷30V; 24/5V |
| Outputs | S, OC, P, OP, PP2, LD, LD2 |
| Shaft Load | axial 200N; radial 200N |
| Max Speed | 6.000 RPM |
| Protection Rating | IP64 / IP65 / IP66 (EN 60529) |
| Operating Temperature | -10°C … +70°C |
| Connection | radial cable / connector |
| Dimensions | see drawings |
| Shaft / Bore | stainless steel |
| Max Torque | 0,025 Nm; 0,040 Nm with shaft protection |
| Weight | ~ 0,45 kg |
| Mounting | axial 200N; radial 200N |
| Inertia | 40 g·cm² |
| Bearing Life | 5 × 10⁹ rev (min) |
| Flange Material | corrosion-resistant aluminium |
| Housing Material | painted aluminium with 180°C inhibitor treatment |
| Shaft Material | stainless steel |
| Operating Temperature | -10°C ÷ +70°C |
| Storage | -30°C ÷ +85°C |
| Humidity | 98% RH without condensation |
| Vibrations | 10 g (10 ÷ 2.000 Hz) |
| Shock | 20 g (per 11 ms) |
Order Code Configurator
Order code
TK601Type
2Assembly
3Pulse Rate (PPR)
4Voltage Supply
5Output Frequency
6Protection Class
7Shaft Diameter
8Electrical Connection
9Output Circuit
10Custom / Special
Code