Encoder Incrementale
TS58
Ø58 mm
Economical optical incremental encoder Ø58 mm. Versatile and reliable with resolution up to 20,000 PPR.
The TS58 is the best-seller of the Italsensor range: an optical incremental encoder with a Ø58 mm body and an output frequency of up to 300 kHz. Available with solid shaft (6, 8, 9.52, 10, 11 mm) or hollow, and 4 flange types (square, standard servo, servo-clip, FRE/REO444). The PA6 polyamide case ensures lightness (0.3 kg) and corrosion resistance. Shaft load up to 200 N radial and axial.
Ø58 mmIP656.000 RPM
Technical Specifications
| Parameter | Value |
|---|---|
| Resolution | Up to 20.000 PPR |
| Power Supply | 5V; 5÷28V; 11÷30V |
| Outputs | S, OC, P, OP, PP2, LD, LD2 |
| Shaft Load | axial 200N; radial 200N |
| Max Speed | 6.000 RPM |
| Protection Rating | IP64 / IP65 / IP66 (EN 60529) |
| Operating Temperature | -10°C … +70°C |
| Connection | radial cable / connector |
| Dimensions | see drawings |
| Shaft / Bore | stainless steel |
| Max Torque | 0,025 Nm; 0,040 Nm with shaft protection |
| Weight | ~ 0,3 kg |
| Mounting | axial 200N; radial 200N |
| Inertia | 40 g·cm² |
| Bearing Life | 5 × 10⁹ rev (min) |
| Flange Material | corrosion-resistant aluminium |
| Housing Material | polyamide 6 (PA6) |
| Shaft Material | stainless steel |
| Operating Temperature | -10°C ÷ +70°C |
| Storage | -30°C ÷ +85°C |
| Humidity | 98% RH without condensation |
| Vibrations | 10 g (10 ÷ 2.000 Hz) |
| Shock | 20 g (per 11 ms) |
Order Code Configurator
Order code
TS581Type
2Assembly / Flange
3Pulse Rate (PPR)
4Voltage Supply
5Output Frequency
6Protection Class
7Shaft Diameter
8Electrical Connection
9Output Circuit
10Custom / Special
Code