Encoder Incrementale
TSW80
Ø80 mm
Economical incremental encoder with Ø80 mm hollow shaft. Accommodates shafts from 20 to 44 mm in diameter.
Ø80 mmIP652.000 RPM (IP55); 1.500 RPM (IP65)
Technical Specifications
| Parameter | Value |
|---|---|
| Resolution | Up to 5.000 PPR |
| Power Supply | 5V; 11÷30V |
| Outputs | S, OC, P, OP, PP2, LD, LD2 |
| Shaft Load | axial 60N; radial 60N |
| Max Speed | 2.000 RPM (IP55); 1.500 RPM (IP65) |
| Protection Rating | IP65 |
| Operating Temperature | -10°C … +70°C |
| Connection | radial cable / connector |
| Dimensions | see drawings |
| Shaft / Bore | stainless steel |
| Max Torque | < 12 Nm |
| Weight | ~ 0,6 kg |
| Mounting | axial 60N; radial 60N |
| Bearing Life | 5 × 10⁹ rev (min) |
| Flange Material | aluminium S11 |
| Housing Material | aluminium S11 |
| Shaft Material | stainless steel |
| Operating Temperature | -10°C ÷ +100°C |
| Storage | -30°C ÷ +100°C |
| Humidity | 98% RH without condensation |
| Vibrations | 10 g (10 ÷ 2.000 Hz) |
Order Code Configurator
Order code
TSW801Type
2Assembly
3Pulse Rate (PPR)
4Voltage Supply
5Output Frequency
6Protection Class
7Hollow Shaft
8Electrical Connection
9Output Circuit
10Custom / Special
Code
Download Center
Want to read this encoder's data? Italsensor builds the dashboard that turns it into useful information.